Product ID:EPOXY CATALYST 22-7589
MSDS Date:12/01/1989
FSC:8010
NIIN:01-053-2647
Kit Part:Y
MSDS Number: BPGDS

STERLING LACQUER MFG CO

3150 BRANNON AVE
SAINT LOUIS, MO 63139-1422
US

Emergency Phone: 314-776-4450

Info Phone: 314-776-4450

Preparer: P.D. MOORE

Cage: 60003

STERLING LACQUER MFG CO

ST. LOUIS, MO 63139-1422 US

Telephone: 314-776-4450

Cage: 60003

ISOPROPYL ALCOHOL (VAPOR PRESSURE 30.0 MM HG @ 68F) (SARA

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 9%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

2-PROPOXYETHANOL (VAPOR PRESSURE 1.3 MM HG @ 77F) (SARA

CAS: 2807-30-9

RTECS: KM2800000

Fraction By Weight: 44%

NORMAL BUTYL ALCOHOL (VAPOR PRESSURE 5.5MM HG @ 68F) (SARA

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 15%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE (VAPOR PRESSURE 22.7 MM HG @ 68F) (SARA 313)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

5.47 LB/GL (655 G/L)

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:INHALE: IRRITATION TO THE RESPIRATORY TRACT
(NOSE/THROAT/LUNGS) AND/OR NARCOSIS. SKIN/EYE: IRRITATING, MAY
INJURE EYE TISSUE IF NOT PROPERLY REMOVED. SKIN ABSORPTION: SLIGHT
IRRITATION DUE SOLVENT. IN GEST: MODERATELY TOXIC. MAY CAUSE
NAUSEA, VOMITING, AND DIARRHEA. DO NOT TAKE INTERNALLY. CONSULT
PHYSICIAN.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS CAN BE
INCREASED BY INHALATION OF VAPORS.

First Aid:EYE: FLUSH WITH WATER 15 MINUTES. GET IMMEDIATE MED
ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH AFFECTED AREA
WITH SOAP AND WATER. INHALATION: MOVE TO FRESH AIR. OBTAIN MEDICAL
ATTENTION IF NE EDED. INGESTION: DO NOT INDUCE VOMITING. GET
IMMEDIATE MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:45.0F,7.2C
Lower Limits:1.2
Upper Limits:15.8
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS W/
FULL FACEPIECE OPERATED IN PRESSURE-DEMAND WHEN FIGHTING FIRES. USE
WATER FOG NOZZLES TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:DON'T USE WATER. FLAMM LIQ RELEASE VAPORS
THAT FORM FLAMM MIXES AT TEMPS AT/ABOVE FLASHPOINT. ELIM/ISOLATE
IGNITE SOURCES. COMBUST PRODUCES: CO2/CO/TOXIC GASES.

Spill Release Procedures:WEAR RESPIRATOR, ABSORB WITH VERMICULITE OR
OTHER ABSORBENT MATERIAL. ELIMINATE ALL IGNITION SOURCES. STOP
SPILL AT SOURCE AND PREVENT SPREADING.

Handling and Storage Precautions:STORE-DRY AREA. CONTAINERS TIGHTLY
CLOSED. NO PHYSICAL DAMAGE. EMPTY CONTAINERS RETAIN PRODUCT
RESIDUES (VAPOR/LIQUID/ SOLID). STORE BELOW 120F.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS DESIGNED TO
COMPLY W/OSHA 1910.106. CLOSURE TIGHT/CONTAINER UPRIGHT-PREVENT
LEAKAGE. DO NOT STORE NEAR HEAT/SPARKS/FLAME. DO NOT GET IN EYES.
KEEP AWAY FROM CHILDRE N. AVOID SKIN CONTACT. DO NOT INGEST.

Respiratory Protection:IF TLV OF PRODUCT/ANY COMPONENT IS EXCEEDED,
NIOSH/MSHA JOINTLY APPROVED AIR SUPPLY RESPIRATOR ADVISED IN
ABSENCE OF PROPER ENVIRONMENTAL CONTROL. OSHA REGULATIONS PERMIT
OTHER NIOSH/MSHA RESPIRATORS UNDER SPECIFIED CONDITIONS
ENGINEERING
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL
ECHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:WEAR SOLVENT RESISTANT GLOVES
Eye Protection:CHEMICAL SPLASH/SAFETY GLASSES
Other Protective Equipment:TO PREVENT REPEATED OR PROLONGED SKIN
CONTACT, WEAR SOLVENT IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER USE, BEFORE
EATING OR SMOKING.
Supplemental Safety and Health
KEY1;F3.FOR INDUSTRIAL USE ONLY. OR ADMINISTRATIVE CONTROLS SHOULD BE
IMPLEMENTED.

HCC:F2
Boiling Pt:B.P. Text:179 TO 301F
Vapor Density:>AIR
Spec Gravity:0.9 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID, SOLVENT ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT.
Hazardous Decomposition Products:BURNING CAN PRODUCE CARBON DIOXIDE
AND/OR CARBON MONOXIDE.

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
ABSORBENT MAY BE DEPOSITED IN LANDFILL IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.